A cute paper plate crab craft with pipe cleaner and paper straw posable legs.
Prep Time5 minutesmins
Active Time10 minutesmins
Total Time15 minutesmins
Yield: 1
Author: Melissa Haines
Cost: $5
Equipment
A hole punch
Scissors
Optional - glue
Materials
1red paper dessert plate
4redPaper Straws
5redpipe cleaners
2black beads
Instructions
For the front legs, you'll cut 1 paper straw as follows: 4 sections that are 1&1/2 inches long and the remaining piece of straw that should be about 2 inches - cut in half - So...you'll have (4) 1&1/2 inch pieces and (2) 1-inch pieces
For the remaining legs, just cut the straws into (4) 2-inch sections - Even Steven :)
Cut 4 pipe cleaners in half - these will be for the 8 legs
With your 1 remaining pipe cleaner - cut (2) 2-inch sections
Eyes- Use a hole punch to punch eyes in the front of the plate and
punch 4 holes on each side of the plate - 8 total - for legs
Attach the 2 small pipe cleaner pieces to the front eye holes and stand them up
Add beads to the top and if you want to - secure it with glue
Legs - Put the half pipe cleaner pieces onto the plate by bending one end of each one through the leg holes
On the front legs,(for each one) add (2) of your 1&1/2 inch pieces of straw and the little 1-inch piece on the end
On the back legs (for each one) add (2) 2-inch sections
Bend the ends of the pipes cleaner over the straws to secure them in place
Notes
Any kid craft or activity should be closely supervised by an adult. Beads are small and a choking hazard