• Lay out a piece of wax paper for the sleds to dry on
• Start by pouring some glue into a tray.
• Dip the skinny edge of the popsicle stick in the glue.
• With glue between the edges, place five sticks side by side to create the seat of your sled
• Now, for the crossbar. Lay a popsicle stick across the seat of your sled, about an inch down
• Once the sled has dried, turn it over and glue the runners to the bottom
• Paint your sled - Add (optional) glitter while the paint is wet
• Glue the ends of your rope to the bottom of the sled. - This is your handle
• Cut out the image of your child from your photograph, leaving a little bit of extra photo paper beneath them.
• Bend the extra photo paper backward, and use that as the piece to glue to your sled.

For Staggered Sled

• You should stagger the pieces for the seat into a V shape at the front
• For this version, The handle looks nice, glued to the top of the crossbar.